Printing a photozine

I’ve made a few zines before, mostly for close to zero budget. For this project, I wanted the reproductions of  photographs to be good, and also wanted to make a lovely object, so I had to spend some money to get it commercially printed. But printing (even digitally) in small quantities is very expensive, so part of the challenge in this process is to think of creative ways to reduce the cost.

Read more

Finding a printer

After watching numerous videos about how to do this, the common advice seemed to be: fin a local printer, so I found a handful in Brighton, and emailed them to get cost estimates for the kind of zine I wanted to make. 

Printers don’t know what a zine is, so you have to call it a brochure or booklet when you’re requesting a quote.

The simplest possible format is a saddle-stitched booklet, where the paper is folder over in the middle, and stapled (aka ‘stitched’) to form the spine. This is fine for most small zines, but beyond a certain page count, you’ll need to go up to something like a perfect-bound booklet 

I also wanted a printer who could help me find the best way forward, so threw in a few questions, partly to get that advice, and partly to see who would be most helpful. 

In my case, here in Brighton, UK, I had a good response from One Digital who were happy to send me multiple quotes, as I tried different ways to get the cost down.

Choices I made

People like the feel of matte paper, but coated paper is much better for reproducing photographs, so I went for a silk coated (ie not super-glossy) stock for the pages. I figured that by using uncoated matte paper for the cover, I could get that nice feel in the hand, without sacrificing image quality on the inside pages. 

I tried costing up some coloured paper stock (GF Smith Colorplan) for the covers, which feels great to touch, but is very expensive, so I tried to think of some way I could add my on covers on. I considered buying the zines bound, then removing the staples, adding my own cover and then re-stapling. I also thought about having the zines bound without covers, and making some kind of sleeve or envelope. 

The plan I settled on was to order the inside zine spreads unbound (ie just flat sheets of A4), printing my own covers separately, and then folding, binding and trimming the whole assembly myself. A lot of work, but it would allow me to add some  nice details, and for the small print run I was considering, a bearable job.

Some printers charge the same for bound or unbound printing (due to the nature of their process) but with One Digital, this approach would actually save me a little money.

But before I went down this road, I wanted to see if I could 

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s